«KALINKA» 전자 키트

KALINKA managing electronics kit:

From use in industrial inkjet printers
To use in any application for plotting an image on any surface

► 48 data lines
► 450 Mbit/s of information transferred to printer
► Freedom of mode choice:
► 48 printing heads at top working frequency, or
► Variable drop mode:
► With four levels (24 heads)
► Or with eight levels (12 heads) of its size

Not just a set of electronic boards but an active KALINKA IT-system:
Flexible and universal tool with great integration potential which can be used not only for printing control but for production management

Storage and output of information on demand about:

Filenames and their printing details
Summary printing volume
Used ink volume
Information about printer work, its settings and protection mechanisms being put into action
Prompts on technical maintenance necessity

Could you add the … function ? - Yes!
- Is it possible to add/change system functions during printer operating process? - Yes!

KALINKA will easily replace those lots of electronic boards used in most printers

Open architecture principle of SunJet

► Without basic kit replacement:
► Set a new sensing element to your hardware
► Manage the third Z co-ordinate
► Add or change a new hardware unit
► Combine electronic plates and additional devices

Basic SunJet kit contains:

1) Single-board computer with Linux operating system installed

2) PCI board

3) Printing carriage board

4) Plus:

Printing head drivers
Servo drive management modules (material and carriage transference)
Vacuum generator and ink pumps management system
Manual control panel

PCI board

transfers data from single-board computer to printing carriage board

high speed of data transfer (450 Mbit/s) allows theoretically to reach the frequency of about 30 KHz

Printing carriage board

data transfer from PCI board through 48 data lines to printing head drivers
linking up various sensing elements and executive devices

Light-emitting-diode UV blocks

► A line with power and irradiation zone size gradation
► Allows to choose precisely any technical and economic indices of UV radiators to suit any printer, taking into consideration the width of printing device passage and printing speed

Printing head drivers
convert unified interface signals into ones suitable for every printing head model
if necessary they adjust the voltage, temperature, the impulse form and duration

Servo driver management modules
carry out unified management of servo drives of any type
provide material and printing carriage transference with set speed, acceleration and braking with high positioning precision

Vacuum generator and ink pumps management system consists of two boards that make:
- control of ink level in sub-tanks,
- ink pumps management,
- set and stabilization of rarefaction in printing heads,
- various service modes (e.g. printing heads cleaning).

Manual control panel is equipped with LCD indicator which shows current information about the state of basic and auxiliary printer systems, push-button membrane panel used to manage printer units, and
magnetic fastening to printer body.

기계 제조

Order a call